Skip to content
Fuel Filters

60320099 Fuel Filter Element for Sany SY485

60320099 Fuel Filter Element is offered as an aftermarket replacement corresponding to the Sany part-number reference. Listed compatibility: Sany SY135-9 SY135C SY150 SY155 SY155-9 SY215 SY235 SY235C SY240C SY335 SY485 SY55 SY60 SY65 SY75.

Part number60320099
Filter typeFuel Filter Element | Fuel Filter
Minimum order60pcs
  • Confirm the installed reference or dimensions
  • Include quantity and delivery country
  • Reference brands identify compatibility only
01Identify

Start from the installed reference, visible label, or existing sample.

02Verify

Check dimensions, media, seal, application, and operating requirements.

03Quote

Confirm quantity, destination, packing, and any inspection notes.

60320099 Fuel Filter Element Overview

60320099 Fuel Filter Element is offered as an aftermarket replacement corresponding to the Sany part-number reference. Listed compatibility: Sany SY135-9 SY135C SY150 SY155 SY155-9 SY215 SY235 SY235C SY240C SY335 SY485 SY55 SY60 SY65 SY75.

This page consolidates the available part-number, dimensional, application, and cross-reference data for technical review before quotation.

Product Identification

Part number 60320099
Product type Fuel Filter Element
Reference brand Sany
Listed compatibility Sany SY135-9 SY135C SY150 SY155 SY155-9 SY215 SY235 SY235C SY240C SY335 SY485 SY55 SY60 SY65 SY75
Minimum order quantity 60 pcs
Application Sany Excavators

Dimensions and Technical Data

Outer Diameter 95 mm (3.74 inch)
Inner Diameter 26 mm (1.02 inch)
Length 205 mm (8.07 inch)

Cross-Reference Part Numbers

Use the references below to identify possible equivalents; they do not replace a dimensional and application check.

Donaldson P502424, R011873
Hengst E361L01
Hifi SN 25052
Mann PU10006X
JCB 333E3974, 332G0652
Sany 60201220, 60064761

Application and Selection Guidance

Fuel filters help control particulate contamination in diesel or gasoline fuel systems. Confirm the part-number reference, element or thread dimensions, gasket interface, and engine or equipment application.

Listed compatibility: Sany SY135-9 SY135C SY150 SY155 SY155-9 SY215 SY235 SY235C SY240C SY335 SY485 SY55 SY60 SY65 SY75.

How to Confirm 60320099 Fitment

Compare the part number, outer diameter, inner diameter, length, equipment or housing fitment with the removed element, equipment manual, or approved drawing. Send photos and measurements when the old marking is incomplete. Availability, lead time, packaging, and final compatibility are confirmed with the quotation.

Identification note: Third-party trademarks and reference numbers are shown only to describe compatibility. OXELR is not claiming that this aftermarket replacement is an original component from the referenced brand.

Details

Part Number

60320099

Part Type

Fuel Filter Element, Fuel Filter

Brand

Sany Replacement

MOQ

60pcs

Compatibility

Sany SY135-9 SY135C SY150 SY155 SY155-9 SY215 SY235 SY235C SY240C SY335 SY485 SY55 SY60 SY65 SY75

Part Name

60320099 Fuel Filter Element

Outer Diameter

95 mm (3.74 inch)

Inner Diameter

26 mm (1.02 inch)

Length

205 mm (8.07 inch)

Application

Sany Excavators

For a faster technical quote, include the following information when contacting OXELR.

Specification

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Commercial

  • Cross-reference and replacement review before quote
  • Trial and repeat quantities stated separately
  • Neutral or buyer-brand packing requested in the RFQ
  • Carton, pallet, and mixed-SKU requirements confirmed with the quote

Quality and Packing

  • End cap, length, outside diameter, and inside diameter checks
  • Media, adhesive, and seal material confirmation points
  • Packing labels matched to requested part numbers and quantities
  • Photo or inspection requirements stated before quotation

What Buyers Usually Confirm

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Supply Review Notes

  • OEM cross-reference review
  • Media and end-cap requirements
  • Inspection points listed in the RFQ
  • Export packing requirements confirmed with the quote

Application Fit

  • Hydraulic systems
  • Compressors
  • Injection molding machines
  • Steel mills
  • Mining equipment
  • Power generation
  • Process filtration

Request a quote

Confirm the required quantity and application below. The product reference is already filled in.