Skip to content
Fuel Filters

65.12503-5033A Spin-On Fuel Filter for Daewoo Doosan Engine DL08

65.12503-5033A Spin-On Fuel Filter is offered as an aftermarket replacement corresponding to the Daewoo Doosan part-number reference. Listed compatibility: Daewoo Doosan DL08 DL08K DL08P DL08S DX380LC.

Part number65.12503-5033A
Filter typeSpin-On Fuel Filter
Minimum order60pcs
  • Confirm the installed reference or dimensions
  • Include quantity and delivery country
  • Reference brands identify compatibility only
01Identify

Start from the installed reference, visible label, or existing sample.

02Verify

Check dimensions, media, seal, application, and operating requirements.

03Quote

Confirm quantity, destination, packing, and any inspection notes.

65.12503-5033A Spin-On Fuel Filter Overview

65.12503-5033A Spin-On Fuel Filter is offered as an aftermarket replacement corresponding to the Daewoo Doosan part-number reference. Listed compatibility: Daewoo Doosan DL08 DL08K DL08P DL08S DX380LC.

This page consolidates the available part-number, dimensional, application, and cross-reference data for technical review before quotation.

Product Identification

Part number 65.12503-5033A
Product type Spin-On Fuel Filter
Reference brand Daewoo Doosan
Listed compatibility Daewoo Doosan DL08 DL08K DL08P DL08S DX380LC
Minimum order quantity 60 pcs

Dimensions and Technical Data

Engine Compatibility Daewoo Doosan DL08 / DL08K / DL08P / DL08S / DX380LC
Outer Diameter 4.29 inch (109 mm)
Inner Diameter 3.56 inch (90.3 mm)
Thread Size 1-14 UN
Length 7.99 inch (203 mm)

Application and Selection Guidance

Fuel filters help control particulate contamination in diesel or gasoline fuel systems. Confirm the part-number reference, element or thread dimensions, gasket interface, and engine or equipment application.

Listed compatibility: Daewoo Doosan DL08 DL08K DL08P DL08S DX380LC.

How to Confirm 65.12503-5033A Fitment

Compare the part number, engine compatibility, outer diameter, inner diameter, thread size, equipment or housing fitment with the removed element, equipment manual, or approved drawing. Send photos and measurements when the old marking is incomplete. Availability, lead time, packaging, and final compatibility are confirmed with the quotation.

Identification note: Third-party trademarks and reference numbers are shown only to describe compatibility. OXELR is not claiming that this aftermarket replacement is an original component from the referenced brand.

Details

Part Number

65.12503-5033A

Part Type

Spin-On Fuel Filter

Brand

Daewoo Doosan Replacement

MOQ

60pcs

Compatibility

Daewoo Doosan DL08 DL08K DL08P DL08S DX380LC

Type

Spin-On Fuel Filter

Engine Compatibility

Daewoo Doosan DL08 / DL08K / DL08P / DL08S / DX380LC

Outer Diameter

4.29 inch (109 mm)

Inner Diameter

3.56 inch (90.3 mm)

Thread Size

1-14 UN

Length

7.99 inch (203 mm)

For a faster technical quote, include the following information when contacting OXELR.

Specification

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Commercial

  • Cross-reference and replacement review before quote
  • Trial and repeat quantities stated separately
  • Neutral or buyer-brand packing requested in the RFQ
  • Carton, pallet, and mixed-SKU requirements confirmed with the quote

Quality and Packing

  • End cap, length, outside diameter, and inside diameter checks
  • Media, adhesive, and seal material confirmation points
  • Packing labels matched to requested part numbers and quantities
  • Photo or inspection requirements stated before quotation

What Buyers Usually Confirm

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Supply Review Notes

  • OEM cross-reference review
  • Media and end-cap requirements
  • Inspection points listed in the RFQ
  • Export packing requirements confirmed with the quote

Application Fit

  • Hydraulic systems
  • Compressors
  • Injection molding machines
  • Steel mills
  • Mining equipment
  • Power generation
  • Process filtration

Request a quote

Confirm the required quantity and application below. The product reference is already filled in.