Skip to content
Water Filters

RT40B16G20CA 5-Micron Polypropylene Depth Filter Cartridge – 3M Micro-Klean™ Replacement

RT40B16G20CA 5-Micron Polypropylene Depth Filter Cartridge is offered as an aftermarket replacement corresponding to the 3M Micro-Klean™ part-number reference. Listed application: Liquid Filtration / Water Filtration / Process Filtration.

Part numberRT40B16G20CA | RT40B16G20CA Cross Reference Donaldson 1C105371
Filter typeFilter Cartridge / Depth Filter Cartridge | Industrial Filter Cartridge / Depth Filter Cartridge
Minimum order60pcs
  • Confirm the installed reference or dimensions
  • Include quantity and delivery country
  • Reference brands identify compatibility only
01Identify

Start from the installed reference, visible label, or existing sample.

02Verify

Check dimensions, media, seal, application, and operating requirements.

03Quote

Confirm quantity, destination, packing, and any inspection notes.

RT40B16G20CA 5-Micron Polypropylene Depth Filter Cartridge Overview

RT40B16G20CA 5-Micron Polypropylene Depth Filter Cartridge is offered as an aftermarket replacement corresponding to the 3M Micro-Klean™ part-number reference. Listed application: Liquid Filtration / Water Filtration / Process Filtration.

This page consolidates the available part-number, dimensional, application, and cross-reference data for technical review before quotation.

Product Identification

Part number RT40B16G20CA
Product type 5-Micron Polypropylene Depth Filter Cartridge
Reference brand 3M Micro-Klean™
Minimum order quantity 60 pcs
Application Liquid Filtration / Water Filtration / Process Filtration

Dimensions and Technical Data

Micron Rating 5 Micron
Filter Media Polypropylene
Series RT Series

Application and Selection Guidance

Depth and water filter cartridges are selected by dimensions, media, micron rating, fluid compatibility, flow requirement, and housing configuration. Confirm these parameters against the installed cartridge.

Listed application: Liquid Filtration / Water Filtration / Process Filtration.

How to Confirm RT40B16G20CA Fitment

Compare the part number, micron rating, filter media, series, equipment or housing fitment with the removed element, equipment manual, or approved drawing. Send photos and measurements when the old marking is incomplete. Availability, lead time, packaging, and final compatibility are confirmed with the quotation.

Identification note: Third-party trademarks and reference numbers are shown only to describe compatibility. OXELR is not claiming that this aftermarket replacement is an original component from the referenced brand.

Details

Part Number

RT40B16G20CA, RT40B16G20CA Cross Reference Donaldson 1C105371

Part Type

Filter Cartridge / Depth Filter Cartridge, Industrial Filter Cartridge / Depth Filter Cartridge

Brand

3M Micro-Klean™ Replacement

MOQ

60pcs

Micron Rating

5 Micron

Filter Media

Polypropylene

Application

Liquid Filtration / Water Filtration / Process Filtration

For a faster technical quote, include the following information when contacting OXELR.

Specification

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Commercial

  • Cross-reference and replacement review before quote
  • Trial and repeat quantities stated separately
  • Neutral or buyer-brand packing requested in the RFQ
  • Carton, pallet, and mixed-SKU requirements confirmed with the quote

Quality and Packing

  • End cap, length, outside diameter, and inside diameter checks
  • Media, adhesive, and seal material confirmation points
  • Packing labels matched to requested part numbers and quantities
  • Photo or inspection requirements stated before quotation

What Buyers Usually Confirm

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Supply Review Notes

  • OEM cross-reference review
  • Media and end-cap requirements
  • Inspection points listed in the RFQ
  • Export packing requirements confirmed with the quote

Application Fit

  • Hydraulic systems
  • Compressors
  • Injection molding machines
  • Steel mills
  • Mining equipment
  • Power generation
  • Process filtration

Request a quote

Confirm the required quantity and application below. The product reference is already filled in.