Skip to content
Hydraulic Oil Filter Elements

LFH4959 Spin-On Hydraulic Filter for Bobcat 328D

LFH4959 Spin-On Hydraulic Filter is offered as an aftermarket replacement corresponding to the Luberfiner part-number reference. Listed compatibility: Bobcat 220 225 325 325D 328 328D 328G 329 331 331D 331E 763H 773G 873G A220 A300 E17 S100 S130 S160 S205 T190 T200 T2250 T320 V417.

Part numberLFH4959
Filter typeHydraulic Spin-on Filter
Minimum order60pcs
  • Confirm the installed reference or dimensions
  • Include quantity and delivery country
  • Reference brands identify compatibility only
01Identify

Start from the installed reference, visible label, or existing sample.

02Verify

Check dimensions, media, seal, application, and operating requirements.

03Quote

Confirm quantity, destination, packing, and any inspection notes.

LFH4959 Spin-On Hydraulic Filter Overview

LFH4959 Spin-On Hydraulic Filter is offered as an aftermarket replacement corresponding to the Luberfiner part-number reference. Listed compatibility: Bobcat 220 225 325 325D 328 328D 328G 329 331 331D 331E 763H 773G 873G A220 A300 E17 S100 S130 S160 S205 T190 T200 T2250 T320 V417.

This page consolidates the available part-number, dimensional, application, and cross-reference data for technical review before quotation.

Product Identification

Part number LFH4959
Product type Spin-On Hydraulic Filter
Reference brand Luberfiner
Listed compatibility Bobcat 220 225 325 325D 328 328D 328G 329 331 331D 331E 763H 773G 873G A220 A300 E17 S100 S130 S160 S205 T190 T200 T2250 T320 V417
Minimum order quantity 60 pcs

Dimensions and Technical Data

Outer Diameter 3.82 inch (97 mm)
Thread Size 1 3/8-12 UN
Length 5.97 inch (151.64 mm)
Gasket OD 2.76 inch (70 mm)
Gasket ID 2.48 inch (63 mm)

Application and Selection Guidance

Hydraulic and transmission filters help control particulate in fluid-power and lubrication circuits. Confirm the element dimensions or thread, seal interface, media requirement, pressure position, and equipment application.

Listed compatibility: Bobcat 220 225 325 325D 328 328D 328G 329 331 331D 331E 763H 773G 873G A220 A300 E17 S100 S130 S160 S205 T190 T200 T2250 T320 V417.

How to Confirm LFH4959 Fitment

Compare the part number, outer diameter, thread size, length, gasket od, equipment or housing fitment with the removed element, equipment manual, or approved drawing. Send photos and measurements when the old marking is incomplete. Availability, lead time, packaging, and final compatibility are confirmed with the quotation.

Identification note: Third-party trademarks and reference numbers are shown only to describe compatibility. OXELR is not claiming that this aftermarket replacement is an original component from the referenced brand.

Details

Part Number

LFH4959

Part Type

Hydraulic Spin-on Filter

Brand

Luberfiner Replacement

MOQ

60pcs

Compatibility

Bobcat 220 225 325 325D 328 328D 328G 329 331 331D 331E 763H 773G 873G A220 A300 E17 S100 S130 S160 S205 T190 T200 T2250 T320 V417

Outer Diameter

3.82 inch (97 mm)

Thread Size

1 3/8-12 UN

Length

5.97 inch (151.64 mm)

Gasket OD

2.76 inch (70 mm)

Gasket ID

2.48 inch (63 mm)

For a faster technical quote, include the following information when contacting OXELR.

Specification

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Commercial

  • Cross-reference and replacement review before quote
  • Trial and repeat quantities stated separately
  • Neutral or buyer-brand packing requested in the RFQ
  • Carton, pallet, and mixed-SKU requirements confirmed with the quote

Quality and Packing

  • End cap, length, outside diameter, and inside diameter checks
  • Media, adhesive, and seal material confirmation points
  • Packing labels matched to requested part numbers and quantities
  • Photo or inspection requirements stated before quotation

What Buyers Usually Confirm

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Supply Review Notes

  • OEM cross-reference review
  • Media and end-cap requirements
  • Inspection points listed in the RFQ
  • Export packing requirements confirmed with the quote

Application Fit

  • Hydraulic systems
  • Compressors
  • Injection molding machines
  • Steel mills
  • Mining equipment
  • Power generation
  • Process filtration

Request a quote

Confirm the required quantity and application below. The product reference is already filled in.