Skip to content
Air Filters

AF4973K Air Filter Element for Nissan EF02 EF02M20 HO1 HO2 HO2S

AF4973K Air Filter Element is offered as an aftermarket replacement corresponding to the Fleetguard part-number reference. Listed compatibility: Nissan EF02 EF02M20 HO1 HO2 HO2S.

Part numberAF4973K
Filter typeAir Filter Element
Minimum order20pcs
  • Confirm the installed reference or dimensions
  • Include quantity and delivery country
  • Reference brands identify compatibility only
01Identify

Start from the installed reference, visible label, or existing sample.

02Verify

Check dimensions, media, seal, application, and operating requirements.

03Quote

Confirm quantity, destination, packing, and any inspection notes.

AF4973K Air Filter Element Overview

AF4973K Air Filter Element is offered as an aftermarket replacement corresponding to the Fleetguard part-number reference. Listed compatibility: Nissan EF02 EF02M20 HO1 HO2 HO2S.

This page consolidates the available part-number, dimensional, application, and cross-reference data for technical review before quotation.

Product Identification

Part number AF4973K
Product type Air Filter Element
Reference brand Fleetguard
Listed compatibility Nissan EF02 EF02M20 HO1 HO2 HO2S
Minimum order quantity 20 pcs

Dimensions and Technical Data

Outer Diameter 104 mm (4.09 inch)
Inner Diameter 62.9 mm (2.48 inch)
Length 189 mm (7.44 inch)
Bolt Hole Diameter 16.8 mm (0.66 inch)

Cross-Reference Part Numbers

Use the references below to identify possible equivalents; they do not replace a dimensional and application check.

Cross Reference Part Numbers Agco 330083844, Baldwin PA2778-FN, Donaldson P775749, Gehl 548970763960, General Motors 25177164, Hifi SA 11522 K, Hyster 3044227, Isuzu ME8970763960, Kobelco VY12935012900, Komatsu 12935012900, Luberfiner LAF8630, Nissan 16546-00H10, Sakura AS-1824, Wix 46262, Yanmar 12935012900

Application and Selection Guidance

Engine and compressor intake filters help control airborne particulate before it reaches downstream components. Selection depends on element dimensions, sealing design, housing, and the listed equipment application.

Listed compatibility: Nissan EF02 EF02M20 HO1 HO2 HO2S.

How to Confirm AF4973K Fitment

Compare the part number, outer diameter, inner diameter, length, bolt hole diameter, equipment or housing fitment with the removed element, equipment manual, or approved drawing. Send photos and measurements when the old marking is incomplete. Availability, lead time, packaging, and final compatibility are confirmed with the quotation.

Identification note: Third-party trademarks and reference numbers are shown only to describe compatibility. OXELR is not claiming that this aftermarket replacement is an original component from the referenced brand.

Details

Part Number

AF4973K

Part Type

Air Filter Element

Brand

Fleetguard Replacement

MOQ

20pcs

Compatibility

Nissan EF02 EF02M20 HO1 HO2 HO2S

Outer Diameter

104 mm (4.09 inch)

Inner Diameter

62.9 mm (2.48 inch)

Length

189 mm (7.44 inch)

Bolt Hole Diameter

16.8 mm (0.66 inch)

Cross Reference Part Numbers

Agco 330083844, Baldwin PA2778-FN, Donaldson P775749, Gehl 548970763960, General Motors 25177164, Hifi SA 11522 K, Hyster 3044227, Isuzu ME8970763960, Kobelco VY12935012900, Komatsu 12935012900, Luberfiner LAF8630, Nissan 16546-00H10, Sakura AS-1824, Wix 46262, Yanmar 12935012900

For a faster technical quote, include the following information when contacting OXELR.

Specification

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Commercial

  • Cross-reference and replacement review before quote
  • Trial and repeat quantities stated separately
  • Neutral or buyer-brand packing requested in the RFQ
  • Carton, pallet, and mixed-SKU requirements confirmed with the quote

Quality and Packing

  • End cap, length, outside diameter, and inside diameter checks
  • Media, adhesive, and seal material confirmation points
  • Packing labels matched to requested part numbers and quantities
  • Photo or inspection requirements stated before quotation

What Buyers Usually Confirm

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Supply Review Notes

  • OEM cross-reference review
  • Media and end-cap requirements
  • Inspection points listed in the RFQ
  • Export packing requirements confirmed with the quote

Application Fit

  • Hydraulic systems
  • Compressors
  • Injection molding machines
  • Steel mills
  • Mining equipment
  • Power generation
  • Process filtration

Request a quote

Confirm the required quantity and application below. The product reference is already filled in.