Skip to content
Air Filters

P772578 Primary Air Filter for Case CX28

P772578 Primary Air Filter is offered as an aftermarket replacement corresponding to the Donaldson part-number reference. Listed compatibility: Case 28 31 35 CX28 CX31 CX34D CX35 CX35D CX38D.

Part numberP772578(Used With P775298)
Filter typeAir Filter Primary
Minimum order20pcs
  • Confirm the installed reference or dimensions
  • Include quantity and delivery country
  • Reference brands identify compatibility only
01Identify

Start from the installed reference, visible label, or existing sample.

02Verify

Check dimensions, media, seal, application, and operating requirements.

03Quote

Confirm quantity, destination, packing, and any inspection notes.

P772578 Primary Air Filter Overview

P772578 Primary Air Filter is offered as an aftermarket replacement corresponding to the Donaldson part-number reference. Listed compatibility: Case 28 31 35 CX28 CX31 CX34D CX35 CX35D CX38D.

This page consolidates the available part-number, dimensional, application, and cross-reference data for technical review before quotation.

Product Identification

Part number P772578
Product type Primary Air Filter
Reference brand Donaldson
Listed compatibility Case 28 31 35 CX28 CX31 CX34D CX35 CX35D CX38D
Minimum order quantity 20 pcs
Related element P775298

Dimensions and Technical Data

Outer Diameter 4.15 inch (105.5 mm)
Inner Diameter 2.37 inch (60.1 mm)
Length 11.44 inch (290.5 mm)

Cross-Reference Part Numbers

Use the references below to identify possible equivalents; they do not replace a dimensional and application check.

Agco 6191515M1
Atlas 2911788
Atlas Copco 4700939802
Baldwin RS3954
Fleetguard AF25539
Hifi SA 16578
Mann C11103/2
Mahle Knecht LX1240
Perkins 901046 26510362
Wix 42801

Application and Selection Guidance

Engine and compressor intake filters help control airborne particulate before it reaches downstream components. Selection depends on element dimensions, sealing design, housing, and the listed equipment application.

Listed compatibility: Case 28 31 35 CX28 CX31 CX34D CX35 CX35D CX38D.

How to Confirm P772578 Fitment

Compare the part number, outer diameter, inner diameter, length, equipment or housing fitment with the removed element, equipment manual, or approved drawing. Send photos and measurements when the old marking is incomplete. Availability, lead time, packaging, and final compatibility are confirmed with the quotation.

Identification note: Third-party trademarks and reference numbers are shown only to describe compatibility. OXELR is not claiming that this aftermarket replacement is an original component from the referenced brand.

Details

Part Number

P772578(Used With P775298)

Part Type

Air Filter Primary

Brand

Donaldson Replacement

MOQ

20pcs

Compatibility

Case 28 31 35 CX28 CX31 CX34D CX35 CX35D CX38D

Outer Diameter

4.15 inch (105.5 mm)

Inner Diameter

2.37 inch (60.1 mm)

Length

11.44 inch (290.5 mm)

For a faster technical quote, include the following information when contacting OXELR.

Specification

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Commercial

  • Cross-reference and replacement review before quote
  • Trial and repeat quantities stated separately
  • Neutral or buyer-brand packing requested in the RFQ
  • Carton, pallet, and mixed-SKU requirements confirmed with the quote

Quality and Packing

  • End cap, length, outside diameter, and inside diameter checks
  • Media, adhesive, and seal material confirmation points
  • Packing labels matched to requested part numbers and quantities
  • Photo or inspection requirements stated before quotation

What Buyers Usually Confirm

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Supply Review Notes

  • OEM cross-reference review
  • Media and end-cap requirements
  • Inspection points listed in the RFQ
  • Export packing requirements confirmed with the quote

Application Fit

  • Hydraulic systems
  • Compressors
  • Injection molding machines
  • Steel mills
  • Mining equipment
  • Power generation
  • Process filtration

Request a quote

Confirm the required quantity and application below. The product reference is already filled in.