Skip to content
Oil Filters

A6511800109 Oil Filter Element for Mercedes-Benz M651

A6511800109 Oil Filter Element is offered as an aftermarket replacement corresponding to the Mercedes-Benz part-number reference. Listed compatibility: Mercedes-Benz M651 W166 W447 CDI Engine.

Part numberA6511800109
Filter typeOil Filter Element
Minimum order60pcs
  • Confirm the installed reference or dimensions
  • Include quantity and delivery country
  • Reference brands identify compatibility only
01Identify

Start from the installed reference, visible label, or existing sample.

02Verify

Check dimensions, media, seal, application, and operating requirements.

03Quote

Confirm quantity, destination, packing, and any inspection notes.

A6511800109 Oil Filter Element Overview

A6511800109 Oil Filter Element is offered as an aftermarket replacement corresponding to the Mercedes-Benz part-number reference. Listed compatibility: Mercedes-Benz M651 W166 W447 CDI Engine.

This page consolidates the available part-number, dimensional, application, and cross-reference data for technical review before quotation.

Product Identification

Part number A6511800109
Product type Oil Filter Element
Reference brand Mercedes-Benz
Listed compatibility Mercedes-Benz M651 W166 W447 CDI Engine
Minimum order quantity 60 pcs

Dimensions and Technical Data

Outer Diameter 2.52 inch (64 mm)
Inner Diameter 1.22 inch (31 mm)
Length 4.53 inch (115 mm)

Cross-Reference Part Numbers

Use the references below to identify possible equivalents; they do not replace a dimensional and application check.

Baldwin P40001
Bosch F026407112
Chrysler 68091826AA / 68091827AA
Donaldson P550564
Fleetguard LF4000
Fiat K68091826AA / K68091827AA
Hifi SO 7217
Mann HU7010z
Mercedes-Benz 1121840425 / 6511800009 / 6511800109 / 6511800309 / 6511840025 / A1121840425 / A6511800009 / A6511800309 / A6511840025
Nissan 15209HG00A
Renault 7424999343
Wix WL10026

Application and Selection Guidance

Oil filters are used to control particulate in engine or equipment lubrication circuits. Confirm the filter format, dimensions, thread and gasket interface, plus the listed engine or machine application.

Listed compatibility: Mercedes-Benz M651 W166 W447 CDI Engine.

How to Confirm A6511800109 Fitment

Compare the part number, outer diameter, inner diameter, length, equipment or housing fitment with the removed element, equipment manual, or approved drawing. Send photos and measurements when the old marking is incomplete. Availability, lead time, packaging, and final compatibility are confirmed with the quotation.

Identification note: Third-party trademarks and reference numbers are shown only to describe compatibility. OXELR is not claiming that this aftermarket replacement is an original component from the referenced brand.

Details

Part Number

A6511800109

Part Type

Oil Filter Element

Brand

Mercedes-Benz Replacement

MOQ

60pcs

Compatibility

Mercedes Benz M651 W166 W447 CDI Engine

Outer Diameter

2.52 inch (64 mm)

Inner Diameter

1.22 inch (31 mm)

Length

4.53 inch (115 mm)

For a faster technical quote, include the following information when contacting OXELR.

Specification

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Commercial

  • Cross-reference and replacement review before quote
  • Trial and repeat quantities stated separately
  • Neutral or buyer-brand packing requested in the RFQ
  • Carton, pallet, and mixed-SKU requirements confirmed with the quote

Quality and Packing

  • End cap, length, outside diameter, and inside diameter checks
  • Media, adhesive, and seal material confirmation points
  • Packing labels matched to requested part numbers and quantities
  • Photo or inspection requirements stated before quotation

What Buyers Usually Confirm

  • OEM part number or drawing
  • Micron rating and beta ratio
  • Filter media and pleat pack
  • End cap and core material
  • Seal or gasket material
  • Collapse pressure
  • Flow rate and working fluid

Supply Review Notes

  • OEM cross-reference review
  • Media and end-cap requirements
  • Inspection points listed in the RFQ
  • Export packing requirements confirmed with the quote

Application Fit

  • Hydraulic systems
  • Compressors
  • Injection molding machines
  • Steel mills
  • Mining equipment
  • Power generation
  • Process filtration

Request a quote

Confirm the required quantity and application below. The product reference is already filled in.